22
Maintenance
Recommended Maintenance Schedule
Important
Refer to your
engine operator’s manual
for additional maintenance procedures.
Maintenance Service
Interval
Maintenance Procedure
8 hours
•
Grease the traction unit
•
Check engine oil level
•
Check for loose fasteners
•
Inspect the tracks for damage or wear
•
Change hydraulic filter after the initial 8-10 operating hours
3
25 hours
•
Check hydraulic oil level
6
•
Inspect hydraulic lines for leaks
50 hours
•
Clean the foam pre-filter and the paper air filter
1
100 hours
•
Change engine oil
1, 2
•
Replace the paper air filter
1
•
Check battery electrolyte level
•
Adjust the track tension
•
Check battery cable connections
•
Check the spark plug
200 hours
•
Change hydraulic filter
1, 3, 5
300 hours
•
Replace the spark plug
400 hours
•
Inspect fuel lines for leaks
•
Change hydraulic oil and filter
1
Yearly/Storage
•
Check for loose fasteners
•
Touch up chipped paint
•
Adjust the track tension
•
Check tracks and road wheels
•
Complete all yearly maintenance procedures specified in the
engine operator’s
manual
•
Charge the battery and disconnect the cables (storage only)
•
Drain the gasoline (storage only)
1
More often in dusty, dirty conditions.
2
Change oil after the first 50 operating hours.
3
Change the hydraulic filter after the first 8–10 operating hours.
4
For severe duty or rental applications, change every 100 operating hours.
5
For severe duty or rental applications, change every 200 operating hours.
6
Check the hydraulic fluid level before using the traction unit for the first time.
