Step
2
Installing the Fuel Tank and
the Fuel Line
Parts needed for this step:
2
Self-tapping screw
1
Fuel tank
Procedure
1. Slide the end of the fuel line onto the elbow
fitting (Figure 4).
Figure 4
1. Fuel tank
3. Fuel line
2. Elbow tting
4. Fuel line clamp
2. Secure the fuel line in place with the fuel line
clamp (Figure 4).
3. Slide the plastic clips on the front of the fuel
tank onto the fuel tank mount (Figure 5).
Figure 5
1. Plastic clip (2)
4. Secure the bottom of the fuel tank to the
fuel tank bracket by installing the self-tapping
screws from the bottom.
Do not overtighten
the screws.
Step
3
Filling the Crankcase with
Oil
No Parts Required
Procedure
The engine crankcase is shipped without oil. You
must fill it with approximately 30 oz. (0.88 L) of
oil before starting the engine. Refer to Checking
the Engine Oil Level in Operation, page 10 for oil
specifications and instructions.
8