Toro 20955, Operator'S Manual

Page: 9 / 116

g033377
Figure 8
1. Dipstick 3. Full marker
2. Add marker
3. Carefully pour about 3/4 of the engine capacity
of oil into the oil-fill tube.
4. Wait 3 minutes for the oil to settle in the engine.
5. Wipe the dipstick clean with a clean cloth.
6. Insert the dipstick into the oil-fill tube, then
remove the dipstick.
7. Read the oil level on the dipstick ( Figure 8 ).
•
If the oil level on the dipstick is too low,
carefully pour a small amount of oil into the
oil-fill tube, wait 3 minutes, and repeat steps
5 through 7 until the oil on the dipstick is at
the correct level.
•
If the oil level on the dipstick is too high, drain
the excess oil until the oil on the dipstick is
at the correct level; refer to
Changing the
Engine Oil (page 21) .
Important:
If the oil level in the engine is too
low or too high and you run the engine, you
may damage the engine.
8. Install the dipstick into the oil-fill tube securely.
4
Charging the Battery
No Parts Required
Procedure
Electric-Start Model Only
Refer to Charging the Battery (page 22) .
5
Assembling the Grass Bag
No Parts Required
Procedure
1. Slip the grass bag over the frame as shown in
Figure 9 .
g027257
Figure 9
1. Handle 3. Grass bag
2. Frame
Note:
Do not slip the bag over the handle
( Figure 9 ).
8