background image

Super Recycler

Walk Mowers

The Toro Starting Guarantee

A Five-Year Full Warranty on All

Toro GTS

®

-5 Engines

Conditions and Products Covered

The Toro Company and its affiliate, Toro Warranty Company,

pursuant to an agreement between them, jointly guarantee that

your Toro Engine will start on the first or second pull for five years

from the date of purchase—if you provide the routine maintenance

it requires—or we will fix it free of charge. This warranty covers the

cost of parts and labor, but you must pay transportation costs. This

covers Toro rotary mower engines.

Instructions for Obtaining Warranty Service

If you think that your Toro product contains a defect in materials or

workmanship, follow this procedure:
1

.

Contact any Toro Authorized or Master Service Dealer to

arrange service at their dealership. To locate a dealer

convenient to you, refer to the Yellow Pages of your telephone

directory (look under “Lawn Mowers”) or access our website at

www.Toro.com. You may also call our Toro Customer Care

Department toll free at 888-865-5688 (U.S. customers) or

888-865-5705 (Canada customers).

2

.

Bring the product and your proof of purchase (sales receipt) to

the Service Dealer.

If for any reason you are dissatisfied with the Service Dealer’s

analysis or with the assistance provided, call us toll free at the

numbers listed or write us at:

Customer Care Department, Consumer Division
Toro Warranty Company
8111 Lyndale Avenue South
Bloomington, MN  55420-1196

Owner Responsibilities

You must maintain your Toro Engine by following the maintenance

schedule detailed in the 

Operator’s Manua

l. You must record this

work in the maintenance chart provided in your 

Operator’s Manual

and keep your proof of purchase. Such routine maintenance,

whether performed by a dealer or by you, is at your expense.

Items and Conditions Not Covered

There is no other express warranty except for The Toro Total

Coverage Guarantee and special emission system coverage on

some products. This warranty does not cover the following:

Any repairs on products used commercially

Normal maintenance including replacement of spark plugs, air

filter, fuel filter, and carburetor adjustments

Oil change and lubrication

Repairs or adjustments due to the following:
– failure to follow proper maintenance procedures
– rotary mower blade striking an object
– contaminants in the fuel system
– improper fuel or fuel mixture (consult your operator’s

manual if in doubt)

– failure to drain the fuel system prior to any period of

non-use over three months

– operation misuse, neglect, or accidents
– repairs or attempted repairs by anyone other than an

Authorized Service Dealer

Special operational conditions where starting may require

more than two pulls, including the following:
– first time starts after extended period of non-use or

seasonal storage

– cool temperature starts such as those found in early spring

and late autumn (applies to rotary products only)

– improper starting procedures

If you have difficulty starting your unit, please check the 

Operator’s

Manual

 to ensure that you are using the correct starting procedure.

This can save an unnecessary visit to a Service Dealer.

General Conditions

All repairs covered by this warranty must be performed by an

Authorized Toro Service Dealer using Toro approved replacement

parts. Repair by an Authorized Toro Service Dealer is your sole

remedy under this warranty.

Neither The Toro Company nor Toro Warranty Company is

liable for indirect, incidental or consequential damages in

connection with the use of the Toro products covered by this

warranty, including any cost or expense of providing substi-

tute equipment or service during reasonable periods of

malfunction or non-use pending completion of repairs under

this warranty.
Some states do not allow exclusions of incidental or

consequential damages, or limitations on how long an

implied warranty lasts, so the above exclusions and

limitations may not apply to you. This warranty gives you

specific legal rights, and you may also have other rights

which vary from state to state.

Guaranteed to Start Maintenance Record

To keep the starting guarantee in effect, you must perform the following maintenance according to the recommended maintenance
schedule. Follow the procedures in this operator’s manual and record all maintenance activities on this chart.

Date

Hours

Used

Air Cleaner

Service

(mowers only)

Change Oil

(does not apply

to two-cycle)

Lubricate Wheels

(mowers only)

Check Spark

Plug

Storage

Preparation

Summary of Contents for 20093

























Reviews: