Toro 20068, Operator'S Manual

Page: 6 / 24

Setup
Important:
Remove and discard the protective
plastic sheet that covers the engine.
1. Installing the Blade Control
Bar
Procedure
Install the blade control bar into the upper handle
(Figure 3).
Figure 3
2. Unfolding the Handle
Procedure
Folding or unfolding the handle improperly can
damage the cables, causing an unsafe operating
condition.
• Do not damage the cables when folding or
unfolding the handle.
• If a cable is damaged, contact an Authorized
Service Dealer.
1. Carefully move the upper handle forward until the
handle halves are in line and nest together as shown
(Figure 4).
Figure 4
2. Tighten the handle knobs (Figure 5).
Figure 5
3. Rotate the handle rearward (as shown) until it clicks
into place (Figure 6).
Figure 6
3. Filling the Engine with Oil
Procedure
Your mower does not come with oil in the engine, but it
does come with a bottle of oil.
1. Remove the dipstick (Figure 7).
6