Toro 20068, Operator'S Manual

Page: 11 / 24

Starting the Engine
1. Turn the ignition key (Figure 15) or pull the recoil
start handle (Figure 16).
Figure 15
Figure 16
2. If the mower does not start in 1 or 2 pulls (or within
5 seconds using the electric starter), press the primer
button 1 or 2 times and try starting it again.
Note:
If the mower still does not start, contact an
Authorized Service Dealer.
Using the Self-propel Drive
To operate the self-propel drive, simply walk with your
hands on the upper handle and your elbows at your
sides, and the mower will automatically keep pace with
you (Figure 17).
Figure 17
Note:
You can self-propel the mower with the blade
engaged or disengaged.
Stopping the Engine
1. Turn the ignition key to the Off position.
2. Remove the ignition key when you leave the mower.
Engaging the Blade
When you start your engine, the blade does not turn.
You must engage the blade to mow.
1. Pull the control bar lock back (Figure 18).
Figure 18
2. Pull the blade control bar to the handle (Figure 19).
11