7
3328-277
Filling the Fuel Tank
Fill the fuel tank with fresh unleaded regular gasoline
from a major name-brand service station.
Important: To reduce starting problems next season,
add fuel stabilizer to the fuel all season, mixing it with
gasoline less than 30 days old.
1/2 in. (1 cm)
m-5570
m-5604
Checking the Engine Oil
Level
1.
Remove the dipstick, wipe it clean, and fully
install the dipstick.
m-5604
m-5571
2.
Remove the dipstick and check the oil level. If the
oil level is below the Add mark on the dipstick,
slowly pour oil into the oil fill tube to raise the oil level
to the Full mark on the dipstick. Do not overfill.
(Max. fill: 20 oz., type: SAE 30 detergent oil with an
API service classification of SF, SG, SH, or SJ.)
3.
Install the dipstick.
Adjusting the Cutting Height
Adjust the cutting height
as desired. Set all four
wheels to the same
height.
1-5/8
1-1/4
2
2-3/8
2-3/4
3-1/8
3-7/8
4-1/4
3-1/2
m-5629
m-5605a
FRONT
Adjusting the Handle Height
To adjust the handle
height, squeeze the
bottom of the handle
halves together (as
shown) and change the
handle holes in which the
pins (A) are mounted, as
follows:
•
Raise the handle
using hole (B).
•
Lower the handle
using hole (C).
m-5612
m-5614
A
B
C
Summary of Contents for 20014
Page 15: ...15 3328 277 ...
