Toro 140-8016, Installation Instructions Manual

Page: 7 / 12

Procedure
Note:
All holes exist in the mower deck for installing the new baffles.
1. Install the right baffle into the deck ( Figure 3 ).
2. Loosely secure the right baffle to the top of the deck using 2 bolts (1/2 x 1 inch), 2 tapping bolts (3/8 x 1
inch), 2 nuts (1/2 inch), 2 washers (1/2 inch), and 2 flange nuts (3/8 inch) as shown in
Figure 3 .
3. Loosely secure the right baffle to the rear baffle using 1 bolt (3/8 x 1 inch) and 1 nut (3/8 inch) as shown
in
Figure 3 .
4. Install the left baffle into the deck ( Figure 3 ).
5. Loosely secure the left baffle to the top of the deck using 3 tapping bolts (3/8 x 1 inch) and 3 flange
nuts (3/8 inch) as shown in
Figure 3 .
6. Loosely secure the left baffle to the rear baffle using 1 bolt (3/8 x 1 inch) and 1 nut (3/8 inch) as shown
in
Figure 3 .
7. Tighten the bolts then the nuts.
g316075
Figure 3
1. Bolt (1/2 x 1 inch) 6. Left baffle
2. Washer (1/2 inch) 7. Bolt (3/8 x 1 inch)
3. Nut (1/2 inch) 8. Nut (3/8 inch)
4. Flange nut (3/8 inch) 9. Rear baffle
5. Tapping bolt (3/8 x 1 inch) 10. Right baffle
7