Toro 139-6655, Installation Instructions Manual, Page: 6 / 12

5
Removing the Existing
Discharge Chute
No Parts Required
Procedure
1. Remove the locknut, bolt, spring, and spacer
holding the deflector to the pivot brackets
(
Figure 5 ).
2. Remove the grass deflector ( Figure 5 ).
Note:
Retain the hardware that you removed
during this procedure so that it is available for
changeover.
g015594
Figure 5
1. Bolt 5. Spring installed
2. Spacer 6. Grass deflector
3. Locknut 7. J-hook end of spring
4. Spring
6
Drilling Holes
For G3 Mower Decks
No Parts Required
Procedure
1. Check the hole diameters in the locations shown
in
Figure 6 .
2. Drill the holes to the specified diameter in the
locations shown in
Figure 6 .
g010808
Figure 6
1. Drill this hole to 3/8-inch
diameter 2. Drill this hole to 7/16-inch
diameter
6