Toro 133-7128, Installation Instructions Manual

Page: 2 / 8

1
Preparing the Machine
No Parts Required
Procedure
1. Move the machine to a level surface (box A of Figure 1 ).
2. Engage the parking brake (box B of Figure 1 ).
3. Remove the key from the ignition switch (box C of Figure 1 ).
4. Remove the negative battery cable from the battery (box D of Figure 1 ).
Figure 1
2
Installing the Headlights
Parts needed for this procedure:
2 Headlight
2 Headlight adapter
5 Cable tie
Procedure
1. Remove the existing left and right headlights from the
headlight positions.
2. Install a headlight adapter to each headlight ( Figure 2 ).
1
2
3
4
g035872
Figure 2
1. Headlight 3. Cable tie
2. Headlight adapter 4. Clip
3. Install the headlights into the front of the machine and
secure them with the existing clips (
Figure 2 ).
4. Secure the electrical connector on the headlight adapter
to the machine wire harness electrical connector with
the cable ties (
Figure 3 ).
2