Toro 132-4193, Installation Instructions Manual

Page: 7 / 16

Figure 13
1. Proximity sensor current
location 4. Prox sensor
2. Nut (M5) 5. Bolt (M5)
3. Bracket 6. Bolt (M8–1 1/4 x 20 mm)
3. Secure the proximity sensor bracket with the 2 bolts
(M5-0.08 x 25 mm) and 2 nuts (M5-0.08 mm) as shown
in Box B of
Figure 13 .
4. Ensure that the distance is the same measurement from
step
1 ( Figure 12 ).
5. Torque the bolts to 791 to 971 N-cm (70 to 86 in-lb);
refer to Box C of
Figure 13 .
6. Measure the distance between the threaded adjustment
block and the top of the bolt, as shown in Box A
of
Figure 14 , on both the front and back threaded
adjustment blocks.
Figure 14
1. Measure here on both
sides of the machine 3. Bolt (M8–1.25 x 30 mm)
2. Bolt (M8–1.25 x 40 mm)
7. Replace the top bolts with the long bolt (M8-1.25 x 40
mm) (Box B of
Figure 14 ).
8. Replace the bottom bolts with the short bolt (M8-1.25
x 30 mm) (Box B of
Figure 14 ).
9. Adjust the bolts to match the measurements from step
6 .
10. Torque the bolts (M8) to 23 to 29 N-m (17 to 21 ft-lb).
7