Figure 25
Side view
Figure 26
Top View – Rear mounts (motors removed)
1.
Weld the blocks 3/4 inches away from the edges.
Figure 27
Top View – Front mounts (motors removed)
1.
Weld the blocks 3/4 inches away from the edges.
Figure 28
Side View – Front mounts (motors removed)
1.
Weld the front motor blocks 1/8 inch over the edge.
Figure 29
Side View – Rear Mounts (Aligned with the edge; motors
removed)
2.
Remove and discard the existing bolt and washer from
the thrust motor (Box A of
).
12
