Figure 10
1.
Frame channel
3.
Floor-channel plate
2.
Kit wire harness
3.
Route the kit wire harness through the opening in the
top of the frame channel (
).
Figure 11
1.
Frame channel
2.
Kit wire harness
4.
Secure the kit wire harness along the frame channel
and as necessary.
Connecting the Kit Wire Harness to the
Washer Pump
1.
Align the 2-socket connector of the wire harness to the
2-blade connector of the washer pump (
).
2.
Push the wire-harness connector onto the pump until
the connector fully seats (
Figure 12
1.
2-socket connector (wire
harness)
2.
2-blade connector (washer
pump)
Connecting the Battery
1.
Connect the negative-battery cable; refer to your
Operator’s Manual
.
2.
Lower the cargo box and close the hood; refer to your
Operator’s Manual
.
5
