Toro 117-0354, Installation Instructions Manual, Page: 2 / 8

Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
Z Stand hub 1
Latch bracket 1
Bolt (3/8 x 1-1/2 inches) 1
1
Flange nut (3/8 inch) 1
Assemble the Z Stand Hub
Carriage bolt (3/8 x 1-1/4 inches) (48,52
and 60 inch machines)
4
Flange nut (3/8 inch) (48, 52 and 60
inch machines)
4
Carriage bolt (3/8 x 1-1/4 inches) (72
inch machines)
6
Flange nut (3/8 inch) (72 inch machines) 6
Bracket 1
2
Angle bracket (72 inch machines) 1
Install the Z Stand Hub
Carriage bolt (3/8 x 1-1/4 inches) 2
Flange nut (3/8 inch) 2
Bolt (1/4 x 3/4 inches) 1
Locknut (1/4 inch) 1
Bracket pin 1
Lanyard 1
3
Cradle bracket 1
Install the Z Stand Bracket
Pivot pin 1
Outer tube 1
Foot 1
Clevis pin 2
Hairpin cotter pin 2
Thrust washer 2
4
Lynch pin 1
Install the Z Stand
5
Foot pedal 1
Install the lift assist foot pedal (Machines
with 48, 52 and 60 inch mower decks).
2