Figure 13
1.
Lever assembly
3.
Bolt (5/16 x 2 inches)
2.
Pivot tube
4.
Locknut (5/16 inch)
2.
Loosely install the center hole of the pivot tab to the
pivot bracket on the toolbar using a bolt (5/16 x 1
inch) and a locknut (5/16 inch) (Figure 14).
5
1
2
4
3
G004103
Figure 14
1.
Pivot tab
4.
Bolt (5/16 x 1 inch)
2.
Pivot bracket
5.
Locknut (5/16 inch)
3.
Toolbar
3.
Slide the end of the toolbar link over the short post on
the pedal lever assembly, and secure it with a retaining
ring (Figure 15).
Figure 15
1.
Toolbar link
4.
Retaining ring
2.
Pedal lever assembly
5.
Washer (7/8 inch)
3.
Lever assembly
4.
Install the post on the other end of the pedal lever
assembly through the top of the lever assembly, and
secure it using a washer (7/8 inch) and a retaining ring
(Figure 15).
5.
With the lift pedal assembly knee bent upwards, install
the square hole on the pivot tab to the end of the
toolbar link using a carriage bolt (3/8 x 1-1/4 inches),
a spacer, a washer (1 inch), a washer (13/16 inch), and
a locknut (3/8 inch) as shown in Figure 16.
8
Summary of Contents for 08731
Page 14: ...Notes 14...
Page 15: ...Notes 15...