Schematics ................................................................. 57
Safety
The TORO WORKMAN meets the requirements of
SAE J2258.
Supervisors, operators and service persons should be
familiar with the following standards and publications:
(The material may be obtained from the address shown).
•
Flammable and Combustible Liquids Code:
ANSI/NFPA 30
•
National Fire Protection Association:
ANSI/NFPA #505; Powered Industrial Trucks
ADDRESS:
National Fire Prevention Association
Barrymarch Park
Quincy, Massachusetts 02269 U.S.A
•
ANSI/ASME B56.8 Personal Burden Carriers
ADDRESS:
American National Standards Institute, Inc.
1430 Broadway
New York, New York 10018 U.S.A.
•
ANSI/UL 558; Internal Combustion Engine
Powered Industrial Trucks
Trucks ADDRESS:
American National Standards Institute, Inc.
1430 Broadway
New York, New York 10018 U.S.A.
OR
Underwriters Laboratories
333 Pfingsten Road
Northbrook, Illinois 60062 U.S.A.
Safe Operating Practices
The Workman is an off–highway vehicle only,
and is not designed, equipped, or manufactured
for use on public streets, roads or highways.
The Workman was designed and tested to offer safe
service when operated and maintained properly.
Although hazard control and accident prevention
partially are dependent upon the design and
configuration of the machine, these factors are also
4
Summary of Contents for 07362TC
Page 57: ...Schematics Hydraulic Schematic Rev A 57...
Page 58: ...Electrical Schematic Rev A 58...
Page 59: ......
