3.
Locate the existing bracket mounted to the cross tube
and under the right side of the dash, and remove the
bracket under the dash (
Figure 4
).
Note:
Retain the hardware.
G009567
1
2
3
3
7
3
2
4
5
3
6
g009567
Figure 4
Right side of the dash shown; 2015 and Before Models Only
1.
Bracket (existing)
5.
Right, front support-tube
assembly
2.
Bolt (existing)
6.
Dash bolt (5/16 x 1 inch)
3.
Nut (existing)
7.
Flange nut (5/16 inch)
4.
Dash-support bracket
(loose)
4.
For 2015 and Before Models only
, assemble the new
dash support bracket to the machine by performing
the following procedure:
A.
Install the dash bolt (5/16 x 1 inch) through the
right, front support tube, dash, and dash bracket
(
Figure 4
).
B.
Loosely install the flange nut (5/16 inch) to secure
the dash bracket and support tube to the machine
(
Figure 4
).
C.
Loosely install the remaining previously-removed
hardware to secure the dash bracket to the cross
tube and frame (
Figure 4
).
5.
For 2016 and After Models only
, secure the canopy
support to the dash support as follows:
A.
Install the spacer and flat washer (11/32 inch)
between the dash and dash support (
Figure 5
).
B.
Install the hex-socket button head screw (5/16 x
2 inches) through the canopy support, dash, and
dash support (
Figure 5
).
C.
Install the flange nut (5/16 inch) to secure the
dash support to the canopy support (
Figure 5
).
g199154
Figure 5
2016 and After Models Only
1.
Hex-socket button head
screw (5/16 x 2 inches)
4.
Spacer
2.
Dash support
5.
Locknut (5/16 inch)
3.
Flat washer (11/32 inch)
6.
Canopy support
5
Summary of Contents for 07324
Page 7: ...Notes...
Page 8: ......
