Toro 07059LT, Operator'S Manual

Page: 10 / 60

2
Checking the Fluid Levels
and Tire Pressure
No Parts Required
Procedure
1. Check the engine-oil level before and after
you first start the engine; refer to
Checking the
Engine-Oil Level (page 38) .
2. Check the brake-fluid level before you first start
the engine; refer to
Checking the Brake-Fluid
Level (page 51) .
3. Check the transaxle-fluid level before you
first start the engine; refer to
Checking the
Transaxle-Fluid Level (page 48) .
4. Check the air pressure in the tires; refer to
Checking the Tire Pressure (page 16) .
3
Burnishing the Brakes
No Parts Required
Procedure
To ensure optimum performance of the brake system,
burnish (break-in) the brakes before use.
1. Bring the machine up to full speed, apply the
brakes to rapidly stop the machine without
locking up the tires.
2. Repeat this procedure 10 times, waiting 1 minute
between stops, to avoid overheating the brakes.
Important:
This procedure is most effective
if the machine is loaded with 227 kg (500 lb).
4
Reading the Manual and
Viewing the Setup Material
Parts needed for this procedure:
1 Operator's Manual
1 Engine owner's manual
1 Registration card
1 Predelivery Inspection Form
1 Certificate of Quality
2 Key
Procedure
•
Read the Operator's Manual and the engine
owner's manual.
•
Fill out the registration card.
•
Complete the Predelivery Inspection Form .
•
Review the Certificate of Quality .
10