The Height Adjuster Assembly
2-Lug Groomer Gearbox and Idler Plate
g396679
Figure 137
1.
Height of cut
screw
7.
Quick up handle 13.
Washer 20.6 x
14.3 mm (0.813 x
0.563 inch)
19.
Adjuster pin
2.
Plow bolt
8.
Groomer height of
cut arm
14.
Compression
spring (inner)
20.
2-lug
groomer-drive
gearbox
3.
Height adjuster
knob
9.
Height of cut
washer
15.
Compression
spring (outer)
21.
Cotter pin
4.
Screw
10.
Lock nut
16.
Washer 20.6 x
10.3 mm (0.813 x
0.406 inch)
5.
Detent spring
11.
Bumper
17.
Serrated-flange
nut
6.
Quick up cover
12.
Lock screw
18.
Eye bolt
Note:
Early universal groomers used 2 non-adjustable compression springs on
eye bolts for the 2-lug gearbox and idler plate. The single-lug gearbox and idler
plate assemblies are the current groomer drive configuration, and use shim
washers to preload the springs; refer to
Universal Groomer (Optional): Service and Repairs
Page 8–26
Greensmaster
®
eFlex 1021
20248SL Rev C
Summary of Contents for 04861
