General Information
Cutting Unit Operator's Manual
The
Cutting Unit Operator’s Manual
provides information regarding the operation,
general maintenance, and maintenance intervals for the cutting units on your
machine. Additionally, if optional kits have been installed on the cutting units
(e.g., groomer), the
Installation Instructions
for the kit includes set-up, operation,
and maintenance information. Refer to the
Cutting Unit Operator’s Manual
and the kit
Installation Instructions
for additional information when servicing
the cutting units.
Supporting the Cutting Unit when Servicing
g311262
Figure 96
1.
Support
2.
Bedbar adjuster screw nuts
Whenever the cutting unit is tipped to expose the bedknife or cutting reel, support
the rear of the cutting unit making sure the back of the bedbar adjuster screws
are not resting on the work surface.
DPA Cutting Units: General Information
Page 7–2
Greensmaster
®
eFlex 1021
20248SL Rev C
Summary of Contents for 04861
