Service and Repairs
Electric Motor
g339147
Figure 67
1.
Frame assembly
4.
Motor adaptor
7.
Key
2.
Transmission gear box assembly
5.
Socket head screw (3 each)
8.
Electric motor
3.
Socket head screw (4 each)
6.
Closed cell foam seal
Note:
A damaged electric motor assembly may cause a #7, #8, #9, or #10 fault
to be generated and displayed on the InfoCenter display. Refer to the
for information on faults.
Removing the Electric Motor
1. Ensure that the cutting-unit-drive lever is in the D
ISENGAGE
position, park the
machine on a level surface, release the clutch bail, engage the service and
parking brake, rotate the key switch to O
FF
, and remove the key; refer to
the
Operator's Manual
.
2. Disconnect the battery pack; refer to
Disconnecting and Connecting the
Lithium Battery Pack (page 5–3)
.
3. Disconnect the electric motor connections from the machine wire harness.
Greensmaster
®
eFlex 1021
Page 5–41
Electrical System: Service and Repairs
20248SL Rev C
Summary of Contents for 04861
