![Toro 04375 Operator'S Manual Download Page 15](http://html.mh-extra.com/html/toro/04375/04375_operators-manual_1132850015.webp)
CIRCUIT BREAKER (Fig. 7)
A 15-amp circuit breaker to protect the electrical system
is in the control panel. Should the circuit breaker actu-
ate, locate and correct the cause for this occurrence.
Then, push the reset button to reactivate the circuit.
SHIFT SELECTOR (Fig. 8)
The shift selector is located on the top of the right hand
panel. It provides two (2) traction selections, plus a
“NEUTRAL” position. It is permissible to shift from
one selection to another while the Greensmaster 3000-D
is in motion. No damage will result.
1.
Neutral — Used for starting Greensmaster 3000-D
engine.
2.
No. 1 Position — Used for greens mowing opera-
tion.
Figure 8
1. Shift selector
3.
No. 2 Position—Used for transport operation.
Note:
If the Greensmaster 3000-D is operated in reverse
with the cutting units down, the cutting units will be
pulled off the lift arms.
SEAT ADJUSTING HANDLE
(Fig. 9)
The lever on left side of the seat allows four inch
(101 mm) fore and aft adjustment.
Figure 9
1. Seat adjusting handle /under seam
15
Controls