28
Caution
If you leave the key in the ignition switch, someone could accidently start the engine and
seriously injure you or other bystanders.
Remove the key from the ignition and disconnect the wire from the spark plug before you do any
maintenance. Set the wire aside so that it does not accidentally contact the spark plug.
Lubrication
The traction unit has grease fittings that must be lubricated
regularly with No. 2 General Purpose Lithium-Base
Grease. If the machine is operated under normal conditions,
lubricate all bearings and bushings after every 50 hours of
operation.
The following traction unit bearings and bushings must be
lubricated:
•
Rear wheel bearings (1) (Fig. 27)
•
Steering fork shaft (1) (Fig. 28)
•
Lift arm pivot (3) and pivot hinge (3) (Fig. 29)
•
Pull frame shaft and roller (12) (Fig. 30)
•
Mow lift pivot (Fig. 31)
•
Lift cylinders (3) (Fig. 32)
•
Mow lockout lever (Fig. 33)
Figure 27
Figure 28
Figure 29
Figure 30
Summary of Contents for 04351 Greensmaster 3050
Page 40: ...40 Hydraulic Schematic ...
Page 46: ...46 ...
