Toro 03247, Installation Manual

Page: 7 / 8

g244666
Figure 13
D. Assemble the switch panel to the
side-frame channels with the carriage
bolts and locknuts (
Figure 12 ) that you
removed in step 3B .
E. Torque the flange locknuts to 1017 to
1243 N∙cm (90 to 110 in-lb).
8
Installing the Sunshade
No Parts Required
Procedure
1. Align the holes in the grommets of the sunshade
with the 4 clipnuts of the side-frame channels.
2. Assemble the sunshade to the frame channels
(
Figure 14 ) with the 4 flange-head bolts (5/16 x
1-1/4 inches) and 4 washers (5/16 inch) that you
removed in
2 Removing the Sunshade (page 2) .
g244327
Figure 14
1. Sunshade 3. Washer (5/16 inch)
2. Flange-head bolt (5/16 x
1-1/4 inches) 4. Clip nut (side-frame
channel)
3. Torque the flange-head bolts to 1017 to 1355
N∙cm (90 to 120 in-lb).
Operation
Using the Cooling Fan
g244665
Figure 15
1. Knob (fan switch)
•
To run the cooling fan, rotate the knob for the
fan switch clockwise to the
LOW
,
MEDIUM
, or
HIGH
fan-speed position ( Figure 15 ).
•
To shut off the cooling fan, fully rotate the knob
counterclockwise to the
OFF
position ( Figure 15 ).
7