6
Installing the Fixed Plate Kit
(Optional)
Parts needed for this procedure:
1
Fixed plate kit (not included)
Procedure
1.
Remove the nuts and washers securing the lift links to
the cutting unit side plate and carrier frame (Figure 10).
Figure 9
1.
Nuts
2.
Washers
2.
Using the number 2 holes, insert a fixed plate onto the
bolts and secure with the nuts removed. The number
1 holes are to be positioned toward the front. Do not
reuse the washers.
Note:
Number 1 is a less aggressive setting and
number 3 is a more aggressive setting.
Figure 10
1.
Nuts
2.
Fixed plate
3.
Loosen the locknuts securing the height-of-cut brackets
to the cutting unit side plates (Figure 11).
Figure 11
1.
Height-of-cut bracket
3.
Adjusting screw
2.
Locknut
4.
Remove the height-of-cut brackets and the roller from
the cutting unit.
5.
Repeat the procedure on the remaining cutting units.
7
