Toro 02617, Manual

Page: 8 / 152

2
Installing the Handlebar
Parts needed for this procedure:
4 T-bushings
2 Bolt (6 x 55 mm)
6 Washer (6 mm)
2 Locknut (6 mm)
2 Knob
2 U-bolt
Handlebar fitting
1 Upper handlebar
1 Bolt (1/4 x 1-3/4 inches)
1
Locknut (1/4 inch)
Assembling the Lower Handlebar
to the Machine
1. Assemble 2 T-bushings into the handlebar
flanges of the mower deck (
Figure 5 ).
g364682
Figure 5
1. T-bushings 2. Handlebar flanges (mower
deck)
2. Align the footstop of the handlebar to the up-stop
bracket on the deck (
Figure 6 ).
g364680
Figure 6
1. Up-stop bracket 2. Footstop
3. Align the hole in the handlebar with the holes in
the bushings (
Figure 7 ), and secure handlebar,
to the machine with a bolt (6 x 55 mm), 2
washers (6 mm), and a locknut (6 mm).
g364681
Figure 7
1. Lower handlebar
3. Washer (6 mm)
2. Bolt (6 x 55 mm) 4. Locknut (6 mm)
4. Repeat step 3 at the other side of the machine.
6