Controls
g364793
Figure 19
1.
Operator-presence bail
2.
Fuel-shutoff valve
Operator-Presence Bail
The operator-presence bail (
) controls the
flywheel brake and ignition of the engine.
•
Squeeze the bail to the handlebar to run the
engine.
•
Release the bail to the handlebar to shut off the
engine.
Fuel-Shutoff Valve
Use the fuel-shutoff valve (
) to control the
flow of fuel to the engine.
•
Close the fuel-shutoff valve when you transport,
maintain, or store the machine.
•
Open the fuel-shutoff valve to run the engine.
Specifications
Model
Cutting width
Product width
02616
457 mm (18 inches)
574 mm (22 5/8
inches)
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to
www.https://www.toro.com/en-GB
for a list of all approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
10
