Toro 02615, Operator'S Manual, Page: 6 / 20

Setup
Note:
Determine right and left side of the machine from
normal operating position.
1
Assembling the Handle
No Parts Required
Procedure
1. Slide the lower handle into the frame ( Figure 3 ).
g017374
1
2
3
4
5
6
Figure 3
2. Secure each side with a retaining pin and a haripin
(
Figure 3 ).
3. Secure the footstop to the right side of the lower handle
using an M6 nut, and M6 bolt, and 2 washers (
Figure 3 ).
4. Attach the footstop to the frame with a retaining pin
and a hairpin (
Figure 3 ).
5. Connect the upper handle to the lower handle by
securing each side with a U bolt, an M6 washer, and a
handwheel (
Figure 4 ).
g017373
1
2
3
4
5
Figure 4
1. Upper handle 4. U bolt
2. Hand wheel 5. Lower handle
3. Washer
2
Filling the Engine with Oil
No Parts Required
Procedure
Important:
Your machine does not come with oil in
the engine. Before starting the engine, fill the engine
with oil.
Max. fill: 0.59 L (20 oz), type: SAE 30 or SAE 10W-30
detergent oil with an API service classification of SF, SG, SH,
SJ, SL, or higher.
1. Move the machine to a level surface.
2. Remove the dipstick ( Figure 5 ).
6