Tornado CK-14/1 PRO, Operation & Maintenance Manual

Page: 6 / 41

6
WHEN THE MACHINE IS DELIVERED
Check the carton carefully for signs of rough handling. Remove the machine from the carton and look for concealed damage. If the
machine is damaged, notify the carrier immediately and request an inspection. Be sure to keep the carton, packing inserts, packing
lists, and carrier’s receipt until the inspector has verified your claim.
BEFORE OPERATING THE MACHINE
Read the manual carefully and completely before attempting to operate the unit. This manual has important information for the use and
safe operation of the machine. FAILURE TO ADHERE TO THESE INSTRUCTIONS COULD RESULT IN SERIOUS BODILY INJURY
OF PROPERTY DAMAGE. Keep this manual on file and handy. This machine will assure years of satisfactory service if operated and
maintained according to recommendations in the manual. If additional information is needed, please contact your local distributor or
write to:
TORNADO INDUSTRIES
333 Charles Ct.
West Chicago, IL 60185
1-800-VACUUMS
All information and specifications printed in the manual and parts list are current at the time of printing. However, because of Tornado’s
policy of continual product improvement, we reserve the right to make changes at any time without notice.
WARRANTY
To protect your investment, promptly fill out the
required information on the warranty card that
comes with the unit and mail it back to
Tornado Industries
Note: Service repair and warranty work
is not normally handled at the factory.
WARNING
The machine was designed for use on floors as per instructions
and recommendations written in this manual. Any deviation from its proper use or purpose and the consequential
damage that may occur is the sole responsibility of the end user.
GENERAL PRECAUTIONS
• You must be trained in the operation of this machine before use. Please read this manual carefully and obtain operation instructions
from your safety director or your authorized Tornado distributor.
• Always operate this machine with all of the cable removed from the handle. Failure to do so will upset the precision balance of the
machine.
• Do not use the Floor Machine for scarifying or sanding.
• Care should be taken to keep cable away from rotating brush.
• Do not attempt to repair warranted machines. All repairs must be done by a qualified and authorized repair center. Non warranted
repairs will be billed back to the owner of the unit.
• Do not use any replacement parts except those specified in the parts list. Unauthorized parts could cause the unit to malfunction and
will void the warranty.
FAILURE TO COMPLY WITH THE ABOVE WARNING INSTRUCTIONS
WILL VOID THE WARRANTY