20
STOPPING THE MACHINE AFTER CLEANING
OPERATION
At the end of the work proceed as follows:
1. Press button (1) to lift up the brushes.
2. Lift up the squeegee using button (2).
3. Take the machine to the place assigned for the water
drainage.
DAILY MAINTENANCE
DRAINING AND CLEANING THE RECOVERY
TANK
1. Hold the exhaust hose (1) placed on the front part
of the machine after having taken it off from its fixing
support.
2. Take off the plug (2) from the exhaust hose acting
upon its lever (3) and empty the recovery tank into ap-
propriate containers, in compliance with the respective
rules concerning liquid disposal.
1. Clean the inside of the tank using a water jet.
CLEANING THE SUCTION FILTER
1. Open the cover (1) and unscrew the knob (2) to
release the filter protection (3).
2. Rotate the filter protection clockwise to release it.
3. Take off the filter and its
protection.
4. Clean with a water jet
especially the bottom part
and the sides of the filter.
5. Do the cleaning proce-
dure precisely.
6. Reassemble the filter.
Absolutely do not clean the inside of the recovery tank
cover as it may results in an irreversible damage of the
suction motor.
DISASSEMBLING THE BRUSHES
With the brush base lifted up (see chapter “ASSEM
-
BLING THE BRUSHES”) quickly rotate the brushes
in order to unlock the spring button to take them off
and clean them with a water jet. In the picture it shows
which direction to rotate the brushes to unlock them.
Summary of Contents for BDSO 27/28
Page 3: ...3 NOTES...
