Tormach, Inc.
P: 608.849.8381 / F: 209.885.4534
tormach.com
TECHNICAL DOCUMENT
Page 2
©Tormach® 2017. All rights reserved.
Specifications subject to change without notice.
TD10422_SmartCool_Install_0417A
NOTE:
If mill is not equipped with an automatic tool changer (ATC), an additional mounting bracket is required
for SmartCool install. Refer to the table below for more details.
PN
Description
37258
PCNC Coolant 1100 Relocation Bracket
37259
PCNC Coolant 770 Relocation Bracket
37260
PCNC Coolant 440 Relocation Bracket
IMPORTANT!
Download and install the latest version of PathPilot before proceeding. PathPilot v1.9.7 or later is
required to use these instructions. For more information, refer to www.tormach.com/updates.
Install SmartCool Head Unit
1.
Identify two pre-existing mounting holes behind spindle on head casting (see
Figure 1
).
NOTE:
Holes may need to be cleaned of paint prior to use.
PCNC 440 mills serial number 80075 and below require two mounting holes to be drilled and tapped:
•
Temporarily place Mounting Bracket behind spindle on head casting
•
Mark hole locations (see
Figure 2
)
•
Drill and tap marks for a M6 x 1 mm screw
Figure 1
Figure 2
Mounting
Bracket
PCNC 440
