TECHNICAL DOCUMENT
TORMACH.COM
Page 1
©Tormach® 2017. All rights reserved.
Specifications subject to change without notice.
TD10422_SmartCool_Install_0417A
SmartCool
™
Install
Product Identification:
SmartCool Starter Kit (PN
37167)
Purpose:
This document details installation and use of the SmartCool programmable coolant system on a
PCNC 1100™, PCNC 770™, or PCNC 440™ mill with PathPilot®.
This document has 10 sections:
1. Install SmartCool Head Unit
6. Make Control Module Connections
2. Route Cables on a PCNC 1100 or PCNC 770
7. Calibrate with PathPilot
3. Route Cables on a PCNC 440
8. SmartCool MultiCoolant Module (PN 37168)
4. Relocate Flood Coolant Mounting Bracket
9. Programming
5. Make Coolant Connections
10. Troubleshooting
Qty
.
SmartCool Starter Kit
PN
1
SmartCool Head Unit
—
1
Control Module
—
1
USB Cable
—
1
Tube
—
1
AC/DC Power Adapter
—
1
Mounting Bracket
—
2
M6 x 16 mm Socket Head Cap Screw
—
2
M6 x 10 mm Button Head Cap Screw
—
2
M6 Small Flat Washer
—
2
M6 Large Flat Washer
—
4
Zip Tie Mount
31460
4
Zip Tie
32791
1
M5 x 12 mm Socket Head Cap Screw
31353
1
Sheet Metal Screw
31718
NOTE:
If any of these items are missing, contact Tormach
Customer Service at (608) 849-8381 for a replacement.
Required Tools:
• Phillips screwdriver • Metric hex wrench set • Adjustable wrench • Wire cutter • M6 x 1 tap
1
1
PCNC 440 mills serial number 80075 and below require holes to be drilled and tapped to complete assembly.
