Tormach 1300PL, Operator'S Manual

Page: 28 / 100

b. Place two 4x4 pieces on the pallet jack legs and
repeat the lift. Place another 4x4 under the side
supports.
c. Repeat the above steps until the crate clears the front
legs of your engine hoist.
2. Attach a sling to the top frame rail of the plasma. Make
sure the sling is positioned securely between two of the
raised accessory mounting pads to prevent side-to-side
slippage of the frame.
WARNING! Make sure that the lifting device
you are using is rated for the weight of the
machine frame - 825 lb (375 kg).
3. Position your engine hoist, crane or forklift above the
sling and put light tension on it, just enough to hold the
frame upright when it is released.
4. Remove the top two bolts holding the A-frame support
of the crate to the machine frame.
5. Remove the two bottom bolts connecting the crate
frame to the machine leg mounting pockets.
6. Use your lifting device to put enough upwards pressure
on the machine that it will be fully supported. Use a pry
bar to push the lower leg mounting pockets off of the
crate mounting bosses.
©Tormach® 2020
Specifications subject to change without notice. Page 28 UM10720: 1300PL Operator's Manual (Version 0820B)
For the most recent version, see tormach.com/support
4: INSTALLATION