This bottom example shows the bolt when it’s completely
fished through the vehicle. You may find it easier to keep the
bolt fisher attached until you get the tie down receiver in place
so that the bolt doesn’t fall into the vehicle frame.
TORKLIFT’S BOLT FISHING GUIDE
-Coiled End of Bolt Fisher-
Note: The hardware may vary as
to what is being fished along with
the bolt. In this instance a 1” X 2”
plate washer is being fished along
with the hex bolt. Different appli-
cations may reqire fishing through
various star washers and flat wash
-
ers for example.
Your guide to understanding the installation of our frame mounted tie downs.
This side of the Bolt Fisher should come
out of a hole where the required hardware
(for example 1” X 2” plate washer) can pass
through.
-Opposite End of Bolt Fisher-
Desired Hole on Vehicle (Place the coiled
end of the bolt fisher through this hole).
WARNING: PULLING TOO HARD ON THE BOLT FISHER CAN RESULT IN
LOST FASTENERS, OR BROKEN BOLT FISHER.