Page 8
INSTRUCTIONS FOR FINISH MAINTENANCE
OF TORKLIFT PRODUCTS
POWDER COATED STEEL:
To keep your Torklift products looking good follow
these guidlines. All steel powder coated Torklift prod-
ucts are sandblasted for maximum adhesion and use
a high quality industrial urethane based powder coat.
Due to the extreme, harsh, undercar environment that
your Torklift products live in, (consistantly sprayed with
corrosive road chemicals such as salt, and road debris),
Torklift does not warranty the power coated finish.
To minimize corrosion from these factors on powder
coated steel products, Torklift recommends regularly
cleaning and inspecting the powder coated surface
and touching up any affected areas with an enamel or
urethane based aerosol paint product. If there are any
areas of surface rust, there are also aerosol spray rust
converters available on the market that can be used as
a preparation to touch-up paint application. These finish
maintenance products are available at any automotive
parts supplier.
POLISHED STAINLESS STEEL :
Torklift utilizes quality grade 304 stainless steel in
our stainless steel polished products. 304 stainless
steel is well known for its anti-corrosive properties.
However, in some environments such as coastal re-
gions or when coming in contact with some road
chemicals, corrosion may occur.
For a quick clean simply use WD40 and a cloth rag.
We also recommend occasional polishing of our pol-
ished stainless products to maintain their attractive
finish. Use an approved stainless steel chrome or alu-
minum mag wheel polish cleaning product which can
be purchased from any automotive parts supplier.
