6
TO CHANGE OR DELETE OVERRIDES
1.
With RUN/SET switch in SET, press mode select until
override LED flashes. Press again and LED is on
constantly.
2.
Press REVIEW and Channel #1 LED flashes;
continue to press review until the desired channel
LED flashes.
3.
Now press ADV until the colon is flashing. At this
time, enter the override time you desire and press
enter.
4.
To delete an entry, press REVIEW until the desired
channel LED is flashing, and press delete.
NOTE:When channel is in override ON Time, it can be
cancelled any time by pressing the button again. The
internal timer will reset. If the override button is pressed
again, override time will start from it’s original amount of
scheduled time.
ASTRONOMIC SET — NORTH OR SOUTH LATITUDES
1.
PRESS MODE SELECT UNTIL THE ASTRO LED IS
FLASHING. PRESS AGAIN TO HAVE LED LIT
CONSTANTLY.
2.
Channel 1 LED is flashing and display shows Ln:00/
3.
The sequence for any Channel to be ASTRO
ON/OFF is:
4.
Channel # PRESS CHANNEL NUMBER BUTTON,
THEN ADV (colons flashing now)
5.
Press AM/PM to change from northern to southern
latitude and vice versa if needed.
6.
Press numbers to desired latitude value of 10° to 60°.
If not known, call local weather bureau.
7.
Set to nearest degree including odd numbers, then
press ADV.
8.
SUNSET TIME — Display now shows the sunset time
for the date the unit was set. Note that Astronomic
time (sunset or sunrise) are always shown as
STANDARD TIME.Days of week will flash, press day
buttons to eliminate days and/or HOLIDAYS. Press
ADV ONLY.
9.
Display now shows :00 with flashing colons and ON
LED is lit.
ASTRONOMIC ON TIME OFFSET
Key in the desired on-time offset 00 to 99 minutes, press
AM/PM for plus or minus offset. Then press ADV. Example:
7:30 PM Astro ON plus 15 min. will be ON at 7:45 PM.
SUNRISE TIME — Display now shows the sunrise time for
the day the unit is set to. PRESS ADV ONLY.
Display shows :00 with flashing colons and OFF LED lit.
ASTRONOMIC OFF TIME OFFSET
1.
Press buttons to the desired OFF time OFFSET 00 to
99 minutes, press AM/PM for plus or minus OFFSET.
(see above)
2.
Press ENTER to set ASTRO settings to memory.
Now next channel to be programmed begins to flash.
ASTRONOMIC WITH TIME SCHEDULE
If you should decide to have, for example, ASTRO ON Time
and schedule OFF do the following:
1.
Follow above ASTRO SETTING for a particular
CHANNEL.
2.
Then, when you have done so, go back and follow
SCHEDULE SET procedure to enter an OFF/ON
schedule for that CHANNEL.
3.
EXAMPLE
a. ASTRO ON
b. TIME SWITCH OFF
c. TIME SWITCH ON
d. ASTRO OFF
Channel may be SET for Astro ON and Time OFF only.
NOTE: When reviewing Astro settings, sunrise and sunset
are displayed in standard time not daylight savings.
REMEMBER! There is no relation between daylight savings
and sunrise and sunset.
REVIEWING THE SETTINGS
REVIEW IN THE SET MODE
Press the MODE SELECT until the sub mode to be
reviewed has its LED FLASHING.Press REVIEW key and
the first item will be displayed in the REVIEW MODE,
although not indicated by any LED. You are able to review,
change and delete, where needed.
DATE TIME REVIEW
Press REVIEW WHEN DATE TIME LED IS FLASHING.
YEAR is displayed, key in the new year and press ADV or
simply press the review button to check the month/date.
You can repeat this as many times as necessary and then,
if any changes were made, press ENTER when time is
displayed. If no changes were made exit by pressing MODE
SELECT.
IN THE REVIEW MODE OBSERVE THE FOLLOWING:
1.
Press ADV after CHANGING a partial entry.
2.
Press REVIEW to get to the next partial entry on
display, and press ENTER at the last partial entry to
put into the memory.
3.
This remains the same for changes in any of the sub
modes.
While REVIEW/MODIFYING in SCHEDULE SET, if you
want to start reviewing a new channel, press the desired
channel button, the CHANNEL LED will be flashing.
This happens when you press REVIEW while the
SCHEDULE LED is flashing or when the next entry appears
on the screen.
Now press the CHANNEL# you wish to review and press
REVIEW. The first chronological entry in that CHANNEL
schedule will be displayed. Colon in display is now flashing.
If you wish to start reviewing from a certain time onwards,
