PROGRAMMING YOUR EWZ 101/103/120
NOTE:
AFTER MAKING ANY CHANGES TO THE
PROGRAM, PRESS
MODE
TO GO TO RUN MODE
AND THEN PRESS
EVENT
TO UPDATE THE
LOAD STATUS.
AT POWER UP:
Unit should be program with AC power. Do not pro-
gram under super cap back up power.
When power-
ing up the unit for the first time, allow 1-2 minutes for
supercap to charge,the display will show: E1A 60 r - 0A,
then 12:00 will flash on the display.
Press
MODE
to go to the CLK mode.
After pressing the
MODE
key the display will
show:
1.0
TO SET CLOCK
Press
HOUR
and
MIN
to advance to the present
hour and mins. Check AM/PM, and press
ENTER
.
1.1 TO MODIFY CLOCK
Press
MODE
until the display shows: CLK. Press
HOUR
an
MIN
. to modify clock and press
ENTER
.
2.0
TO SET DATE
If you are setting for the first time, display will
show:
Press
MONTH, DATE,
and
YEAR key
to advance
to the desired Month, Date and Year, then press
ENTER
.
2
MO TU WE TH FR SA SU ASTRO
CH1 MOM
AM
PM OFFSET CH2
CLK
DATE SCH AUTO MAN
MO
TU WE TH FR SA SU ASTRO
CLK
DATE
SCH AUTO MAN
EWZ101_120single 7/25/07 10:18 PM Page 4