The bar under H2 is flashing. Press ADVANCE to pass it.
NOTE: Setting Holiday Dates will be covered in section 7.0.
The TIME/DAY symbol is flashing again. Press
ADVANCE to go to the Date mode or RUN/SET to go
to the Run (Operating) mode.
NOTE: You can press the RUN/SET key at any time
to quickly switch from the Set modes to the Run mode,
or vice versa.
1.1 TO CHANGE TIME AND DAY
Press the RUN/SET key once if in the Run mode or
twice if in another mode. The TIME/DAY symbol will
flash. Press ENTER.
The hour digits flash. Press the ADVANCE key to
modify the hour. Press ENTER.
The minutes flash. Press the ADVANCE key to modify
the minutes. Press ENTER.
The bar under Sunday flashes. Press ADVANCE to
select the current day, if not Sunday. Press ENTER.
The bar under H1 flashes. Press ADVANCE twice to
pass H1 and H2.
The TIME/DAY symbol is again flashing. Press
ADVANCE to proceed to another mode or RUN/SET
to go to the Run mode.
2.0 TO SET DATE
From the Run mode, press the RUN/SET key. The
TIME/DAY symbol will start flashing. Press the
ADVANCE key until the DATE symbol begins to flash.
The display will show
7
SU MO TU WE TH FR SA H1 H2
HOLIDAY
TIME/DAY
DATE
SCH/RVU
SET
LATITUDE
SUNSET
SUNRISE
ON
A
SCH.
SIGNAL
OFF
B
2
SIG. TIMER
Press ENTER.
The month digits are flashing. Press ADVANCE, to set
the month. Press ENTER.
The date digits are flashing. Press ADVANCE to set
the current date. Press ENTER.
The year digits are flashing. Press ADVANCE to set
the present year. Press ENTER.
The DATE symbol is flashing again. Press ADVANCE
to go to another mode or RUN/SET to go to the Run
mode.
2.1 TO CHANGE DATE
Press the RUN/SET key once if in the Run mode or
twice if in another mode. The TIME/DAY symbol flash-
es. Press ADVANCE to go to the Date mode. (DATE
symbol flashes). Press ENTER.
The month digits flash. Press ADVANCE to modify it if
needed. Press ENTER.
The date digits flash. Proceed in the same way as
before for the date and year digits.
When you are finished, the DATE symbol will again
flash. Press ADVANCE to proceed to another mode or
RUN/SET to go to the Run mode.
3.0 TO SET DAYLIGHT SAVINGS DATES
NOTE:
The daylight savings dates are set in the
block holiday portion of the Holiday mode.
Press the RUN/SET key to go from the Run mode to
the Set modes. The TIME/DAY symbol flashes. Press
ADVANCE and go to the Holiday mode. Press ENTER
when the HOLIDAY symbol is flashing.
8
SU MO TU WE TH FR SA H1 H2
HOLIDAY
TIME/DAY
DATE
SCH/RVU
SET
LATITUDE
SUNSET
SUNRISE
ON
A
SCH.
SIGNAL
OFF
B
SIG. TIMER
3
