Torin BIG RED TR6375E Owner'S Manual Download Page 4

4

  SAFETY MARKINGS

  SAFETY

WARNING!

1.  Study, understand, and follow all instructions before operating this device.

2.  Do not exceed rated capacity. (includes user, tools, equipment and personal items).

3.  Use only on hard, level surfaces, with less than 3 degrees of slope.

4.  Do use as a dolly.

5.  Sit down gently! Avoid shock loads caused by jumping or falling onto product.

6.  Do not stand on product.

7.  Beware of pinch and crush hazards when folding and unfolding.

8.  Keep out of the reach of children! This device is not appropriate for children’s use.

9.  Do not use product unless vehicle is properly secured.

10.  Only attachments and/or adapters supplied by the manufacturer shall be used.

11.  Do not allow anyone under a vehicle that is being repaired, until the vehicle has been properly supported 

by jack stands.

12.  Use wheel chocks or other blocking devices on opposing wheels before perfoming work on a vehicle.

13.  No alterations shall be made to this product.

14.  Do not use this product for any use other than the manufacturer specified usage.

15.  Failure to heed these markings may result in personal injury and/or property damage.

DO NOT OPERATE OR REPAIR THIS EQUIPMENT WITHOUT READING THIS MANUAL. 

To maintain the product and user safety, the responsibility of the owner is to read and follow these instructions.

• Inspect the product for proper operation and function.

• Keep instructions readily available for equipment operators.

• Make certain all equipment operators are properly trained; understand how to safely and correctly operate 

the unit.

• Allow unit operation only with all parts in place and operating properly.

• Use only genuine replacement parts.

• Service and maintain the unit only with authorized or approved replacement parts; negligence will make the 

product unsafe for use and void the warranty.

• Folding components can present pinch and crush hazards during use of this product. Exercise caution when 

performing adjustments and always be alert and sober

• Carefully inspect the unit on a regular basis and perform all maintenance as required.

• Store these instructions in a dry and clean environment that allows any user access to the manual before 

use.

• Keep all decals on the unit clean and visible.

Always follow safety precautions when installing and operating this product. Keep all decals on the unit 

clean and visible. Before proceeding ensure that you fully understand and comprehend the full contents of 

this manual. Failure to operate this equipment as directed may cause injury or death. The distributor is not 

responsible for any damages or injury caused by improper use or neglect.

SAFETY!

BEFORE PERFORMING ANY WORK ON A VEHICLE OR USING THIS PRODUCT;

Always use Jack Stands!

DO NOT USE

 wood blocks or any other non-approved load sustaining devices. The manufacturer only 

warrants loads to be sustained by jack stands that meet current ASME standards.

DO NOT USE

 wood blocks or any other non-approved lifting devices for a means of lifting with a jack and or 

load being raised. Failure to head these warnings may cause injury or death.

Folding components can present pinch and crush hazards during use of this product. Exercise caution when 

performing adjustments and always be alert and sober while assembling and using this equipment.

CAUTION

Summary of Contents for BIG RED TR6375E











Reviews: