Torin BIG RED TR6375E Owner'S Manual Download Page 2

2

  IMPORTANT

  OWNER / USER RESPONSIBILITY

  INTENDED USE

  TECHNICAL SPECIFICATIONS

Before You Begin Register This Product.

For future reference, record the model name, model number, date of manufacture and purchase date of this 

product. You can find this information on the product.

Model Name 

Model Number

Date of Manufacture

Date of Purchase

DO NOT OPERATE OR REPAIR THIS PRODUCT WITHOUT READING THIS MANUAL.

Read and follow the safety instructions. Keep Instructions readily available for operators. Make certain all 

operators are properly trained and understand how to safely and correctly operate the product. By proceeding 

you agree that you fully understand and comprehend the full contents of this manual. Failure to operate this 

product as intended may cause injury or death. The manufacturer is not responsible for any damages or injury 

caused by improper use or neglect. Allow product operation only with all parts in place and operating safely. 

Use only genuine replacement parts. Service and maintain the product only with authorized or approved 

replacement parts; negligence will make the product unsafe for use and will void the warranty. Carefully 

inspect the product on a regular basis and perform all maintenance as required. Store these instructions 

in a protected dry location. Keep all decals on the product clean and visible. Do not modify and/or use for 

any application other than that for which this product was designed. If you have any questions relative to a 

particular application, DO NOT use the product until you have first contacted the distributor or manufacturer to 

determine if it can or should be performed on the product.

For technical questions please call 1-888-448-6746.

This device is designed to be as a mechanic’s creeper. It is intended to be used to support and move, along 

a smooth and level surface, rated capacity loads consisting of a single person weighing no more than the 

capacity specified. This product is used for the purpose of performing automotive maintenance or service.

This device is not intended, designed or engineered to be used for any other purpose.

Description

Item

TR6375E

Capacity

250 lbs

____________________________

____________________________

____________________________

____________________________

Summary of Contents for BIG RED TR6375E











Reviews: