6
ASSEMBLY
All numbers in parenthesis () refer to the index number from the parts breakdown
1. Attached rail sections (16) to left and right posts
and lower cross member (24) using bolts (15),
washers (17), lock washers (18) and nuts (19).
3. Put the frame in an upright position, and attach
the upper crossbeam (2) and attached the springs
(6). Then attach eye hooks (8), using nuts (10) to
middle bolster (19). The attach springs to middle
bolster. (Middle Bolster will then suspend between
left and right frame posts.)
4. Carefully place 12 ton hydraulic bottle jack (7)
in between the middle bolster (9) and upper
crossbeam (2). Adjust the nuts (10) to the proper
position once jack has been installed.
2. Put the press frame in an upright position, attach
upper crossbeam (2) to left and right posts (14)
using bolts (1), washer (2), lock washer (3) and
nuts (4). Hook mounts should face down on upper
crossbeam.
19
16
17
15
24
18
14
2
4
14
3
2
1
10
9
8
2
6
9
2
7
Summary of Contents for T51201
Page 16: ...16 ASSEMBLY DIAGRAM Optional...
Page 35: ...35 SCH MA DE MONTAGE Optionnel...
