- 24 -
Operation
SEQUENCE DISPLAY
Single screen sequence display is possible by pressing the [SEQUENCE] button.
The Sequence Dwell Time can be set in the [SETUP] – [DISPLAY] menu.
icon will appear on the screen during the sequence display mode.
PTZ Control
This is a mode to control Camera Direction/Focus/Zoom/Preset/Swing/Pattern/Group during the
Monitoring Mode.
Press the [PTZ] button from the Monitoring Mode or press [MENU] and select PTZ.
The window showing the PTZ control status will appear on the bottom of the screen
CATEGORY OPERATION
CHANNEL
Select the channel you wish to control.
[CH] : Change channels
PAN / TILT
[Left, Up] : Move camera up and down.
[Right, Down] : Move camera left and right.
ZOOM
Use ZOOM buttons to zoom in/out.
FOCUS
Use the FOCUS buttons to focus in/out.
APERTURE
Use the IRIS buttons to adjust the aperture.
For Preset/Swing/Pattern/Group/Setting press [ENTER] after selecting the channel
Enter the Setting mode of the PTZ to set the Preset/Swing/Pattern/Grou
p movement of the PTZ Camera.
※
Please refer to the Operation Manual of the PTZ camera to setup the PRESET, SWING,
PATTERN, GROUP configurations.
