- 15 -
Configuration
CATEGORY DEFAULT
ADJUSTMENT
PTZ DRIVER
NONE
Select the PTZ Driver.
[Up, Down, Right, Left] : Select the PTZ Driver
< Compatible PTZ DRIVER List >
Pelco_D, Pelco_P, Panasonic, PT_A100L, DOME1, DOME2, HSDN_251N,
WPT_101, SJ_2819, SK_2162D, DSC_230, GROOM_D106, CAZ1723, VC_C4,
SCC_C4201, CRR1600T, SRX_100B, VVK_3000, ORX_1000, NK97CH, PIH717,
PIH718, Vicon, Hangang, Gateway, E_DSO, Ateye, GRX_1000A, AD, JO308ACU,
Sensormatic, Smartscan, Sungjin
PTZ Setting
Set up Baud Rate, Data Bit, Parity, Stop Bit values.
[ENTER] : Enter the PTZ Configuration Menu.
Press [ENTER] to TEST.
[Left, Down] : Decrease Rate/Bit/Parity
[Right, Up] : Increase Rate/Bit/Parity
PARITY : NON, ODD, EVEN.
SENSITIVITY 80
Set the SENSITIVITY level(Limit : 0(Low)~100(High))
[Left, Down] : Decrease level
[Right, Up] : Increase level
Number keys can also be used to change the Sensitivity level.
MOTION
Select Motion Detection Area.
[Up, Down, Right, Left] : Move position
[ENTER] : Toggle between Able
Ù
Cancel
MOTION DETECTION AREA
The area selected for motion detection will be indicated in pink as shown below.
