Torc REMOTETASK ALPHA, Parts And Installation Manual

Page: 7 / 91

R
EMOTE
T
ASK
™
A
LPHA
P
ARTS AND
I
NSTALLATION
M
ANUAL
P
ARTS AND
T
OOLS
6 V
ERSION
1.1
2 Safety Information
2.1 General Safety Information
Failure to observe the outlined safety measures regarding operation, maintenance, and repair is
the most common cause of accidents that involve product operation. It is important to heed all
safety precautions and warnings provided in this manual and on the product.
Do not perform any procedure in the Parts and Installation manual until you have read
understand the instructions and warnings in the manual. Use only proper tools and
observe all precautions that pertain to the use of these tools. Failure to follow these
procedures can result in personal injury.
The list of procedures and hazards identified by WARNING and NOTICE labels is not all
inclusive. TORC® cannot anticipate every possible circumstance that might involve a potential
hazard. The warnings in this publication and on the product are, therefore, not all inclusive.
Ensure that the product will not be damaged or made unsafe by the operation, installation,
maintenance, or repair procedures used.
The following symbols are used throughout the manual to indicate a particularly hazardous
condition:
The warning label is used when a hazardous condition could result in serious
injury or loss of life.
A caution label identifies a hazard or procedure that could result in damage to
the product or loss related to equipment malfunction.
A notice label indicates information that may not be applicable regarding system
safety, but needs to be known for best system performance.