PowerHub
TM
User Manual, Version 1.2
21
A reset to factory defaults button (5) can be pressed using a paperclip or other small object.
Holding this button until a beep is heard (approximately 5 seconds) will reset all configuration
settings to the factory defaults. Once the button is released, the PowerHub will reset to apply
the settings.
The input power connector (6) is a Molex 42820-2212 connector. The mating plug is Molex part
number 42816-0212. Pin 1 is positive input and Pin 2 is ground.
7.3
Connector Pinouts
INPUT CONNECTION
PIN 1
PIN #
DESCRIPTION
1
V
IN
+
Positive input terminal
2
GND Negative input terminal
OUTPUT CONNECTIONS
PIN 1
PIN #
DESCRIPTION
1
V
OUT
+
Positive output terminal
2
GND Negative output terminal
