Shanghai TopXGun Robotics Co.,Ltd.
6th Floor,3rd. Building,Elite City,No. 57, AnDemen Street,Yuhua District,Nanjing,China,210012
TEL:
025-86467760
FAX:
025-52323411
The aircraft will exit automatical return and automatically switch to the current flight
mode corresponding to the remote control 5-channel.
4.2 Low voltage protection
You can set a low-voltage protection trigger threshold in the adjusting parameter
software. The trigger threshold is the battery voltage value with load, so the battery
measuring voltage after landing is generally higher than the trigger voltage you set
when low-voltage protection is triggered during flight .
he low voltage protection has two levels. After the first stage low-voltage protection
is triggered, the LED alarm is
(
∞
). The aircraft will automatically return or land
in place according to the settings in the adjusting parameter software. (To set
protection measures for primary low-voltage protection, please see "step 6" in the
"installation and testing step"). After the two stage low-voltage protection is triggered,
the LED alarm is
(
∞
). The aircraft will automatically land in place.
l
When the low-voltage protection function is implemented, it can
only be switched to gesture mode or return mode.
l
After the automatic landing function of low-voltage protection is
implemented, you can exit the protection action by switching to
gesture mode.
4.3 Automatic return altitude statement
l
It is automatically returned to the home point when the altitude is
above 100M and decreases uniformly until reach to the altitude of
100m above the home point, and then landing at a vertical uniform
speed.
l
It is
automatically returned when the altitude is below 100m,
flight to the home point with translation uniform velocity, and then
landing at a vertical uniform speed.
