TK220 GPS Car Alarm Website:www.t10.cn, email:[email protected] User Manual
Page
16
(
2
)
Wiring Diagram
Notes
:
: This line is used to receive the signal from remote control. please draw it
straight and fix it alone at wide place, otherwise, it will affect the working
distance of remote controls..
: This three lines are used to start your car remotely, please refer to the
following wiring diagram of remote starter. The command to start the engine is:
111111STR
: This line is used to
open your car’s trunk.
This function is for reference, not all of the cars can work with this function.
when you press the DISARM button and hold it for 2 seconds, the TRUNK
OPEN line (gray color) will generate a ground signal. you can use this signal to
unlock the trunk.