TK220 GPS Car Alarm Website:www.t10.cn, email:[email protected] User Manual
Page
10
(The mute alarm button on the remote controller has two functions: One is
for mute alarm, the other is for emergency help)
Set up Movement Alert
Command:
111111MOV@
@ =0, to disable the movement alert;
@=1, to enable the movement alert;
@=?, to check the setting of movement alert.
If user sends 111111MOV1 to enable the movement alert function, the
movement alert centre is your tracker’s current position. Every time when
the system is armed, if the car moves away from the present parking point
for about 90 meters(default setting), the movement alert will be triggered.
User can change the radius of triggering movement alarm by this SMS
command:
111111MOV:R
(R=50~999).
Set up Over-speed Alert
111111SPD:X
x is the speed in KM/H , maximum value is 255M/H
(For example: 111111SPD:120, if the car speed is over 120KM/H, it will
send SMS to warn you)
111111SPD:0
to disable the over-speed alert. It is the default setting
When the over-speed alert function is activated, if the car is running over the
speed limitation, the tracker will send out alert message.
Remark: this function is just for reference, because there might be some
time delay or error in detecting the running car
’s real speed by GPS.
Set up Geo-Fence Alert
111111FEN0
Disable the Geo-fence
111111FEN1
Enable the Geo-fence, using the stored setting
111111FEN
？
Check the setting of geo-fence
