MT113 GPS Motorcycle/Vehicle Tracker User Manual
Page
12
III. Alarm Types
SOS Alarm
In any condition, if the SOS button is pressed, it will trigger the SOS alarm.
Shake Alarm
In arming status, if the car/motorcycle is vibrated, it will trigger this alarm.
Power Failure Alarm
In arming status, if the car/motorcycle
’
s battery is cut off, it will trigger this
alarm.
Engine ON Alarm
In arming status, if the car/motorcycle
’
s engine is ON, it will trigger this
alarm. If the tracker is used to upgraded the existing normal car
alarm(connect the blue line to the positive pole of the alarm
’
s siren, then
send 000000LNK1 to make it work in this mode),the alarm will be triggered
when the blue line detects a continuous positive signal for 5 seconds.
Movement Alarm
In arming status, the movement alert is enabled automatically. Once the car
moves away from the parking point for 80 meters, it will trigger this alarm.
Geo-Fence Alarm
Once the Geo-fence is activated, if the car/motorcycle oversteps the
boundary, it will trigger this alarm.
Over-speed Alarm
If the car/motorcycle runs over the speed limitation, it will trigger this alarm.
(Remark: this function is just for reference, because there might be some
time delay or error in detecting the running car
’
s real speed by GPS.)
NOTE: the SOS alarm will only be sent to the 2
nd
phone, the 3
rd
phone
number & the GPRS tracking center, the other alarms will send to all the three
program phone numbers & GPRS tracking center.
TO
P
TEN
