MT113 GPS Motorcycle/Vehicle Tracker User Manual
Page
9
Remarks: When the tracker speeds higher than the preset value, it will send an SMS to the
authorized phone number.
XX is the preset value of speed and in 2 digits.
=00 , to turn off this function
=[01, 20] (unit: 10Km/h)
In this example, when the tracker
’
s speed is over 80km/h, an SMS alarm will be sent out.
Geo-fence Alarm
W******,017,X
W******,117,X
W000000,017,
11404.0000,E,2232.0010,N,
11505.1234,E,2333.5678,N
Remarks: 017 is for alarm when tracker moves out the preset scope; 117 is for alarm when
tracker moves in.
When the tracker moves in or out, it will send an SMS alarm to the authorized phone number
for SOS.
X is the coordinates which include:
Lower-left X,Lower-left Y,Upper-right X,Upper-right Y
For example, 11404.0000,E,2232.0010,N,11505.1234,E,2333.5678,N
Note:
1. Lower-left X should be less than Upper-right X;
2. All longitudes and latitudes should be in ASCII format as follows:-
Longitude: DDDMM.MMMM,E/W. 4 places of decimal.
‘
0
’
is needed to be stuffed if no value
available.
Latitude: DDMM.MMMM,N/S. 4 places of decimal.
‘
0
’
is needed to be stuffed if no value
available;
3. Only one alarm can be set in either Movement Alarm or Geo-fence Alarm;
4. Send W******,006,00 to turn off Geo-fence function.
Stop the Car in Safe Mode
W******,120,F
W******,220,F
W000000,120,1
W000000,220,1
Remarks: This function is achievable only when the speed is below 10km/h (command 120)
or 20km/h (command 220) and at the meantime GPS is available.
F=0, to close the output (Normal) =1, to open the output (Being Stopped)
SMS Commands for Settings of GPRS Tracking
(For mass programming, user is suggested to use application
---Parameter Editor to do the settings)
Tracker
’
s GPRS ID
Last 14 number of IMEI number
Remarks: The Tracker
’
s GPRS ID is the last 14 digits of the IMEI number. User cannot
change it. E.g.: IMEI:355840023214059, then GPRS ID is: 55840023214059
TO
P
TEN